PHLTD single group output power supply T-series DC output voltage 5V 12V 24V
PHLTD single group output power supply T-series switch power supply input voltage range 85-132VAC170-264VAC switched by switch 240-370VDC 47-63Hz,high efficiency, low operating temperature
PHLTD single group output power supply T-30V input current 0.8A, 115V 0.45A, 230V cold start current 18A/115VAC; 36A/230VAC
PHLTD single group output power supply T-60V DC voltage adjustable range CH1:+10-5% input current 1.6A, 115V 0.8A, 230V
,

PHLTD DC Three Group Switching Power Supply T Series

The PHLTD brand’s DC three group switching power supply T multiple output voltage product is a high-performance and multifunctional power supply device.

Categories: ,
Dimensional diagram of T-series switch power supply
T-30

PHLTD single group output power supply T-30V size 129x98x38mm weight 0.4kg
T-series switch power supply parameter table
          model
performance		 T-30A T-30B T-30C
CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC output 5V 12V -5V 5V 12V -12V 5V 15V -15V
output voltage tolerance ±2％ 1.94 1.9 6% ±2％ ±5％ ±2％ ±5％ ±5％
output current 3A 1A 0.5A 3A 1A 0.5A 3A 0.5A 0.5A
Current range 0.5-3A 0.1-1A 0.1-0.5A 0.2-4A 0.3-6A 0.2-2.2A 0.6-3A 0.2-0.5A 0.2-0.5A
Ripple and noise ① 50MVP-P 100mVp-p 50MVP-P 150MVP-P 75mVp-p 150mVp-p 100MVP-P 100mVp-p 100mVp-p
Stability of incoming lines ±0.5％ ±1％ ±1％ ±1％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％
Load stability ±0.5％ ±5％ ±5％ ±4％ ±0.5％ ±4％ ±1％ ±0.5％ ±0.5％
DC OUTPUT POWER 30W 33W 30W
Efficiency (typical) ② 72% 72% 83%
Adjustable range of DC voltage CH:+10-5% CH:+10-5% CH:+10-5%
Input Voltage 85-132VAC/170-264VAC switched by switch 240-370VDC 47-63Hz
Input Current 0.8A/115V 0.45A/230V
Impulse current Cold start current 18A/115VAC; 36A/230VAC
Leakage current ＜0.5mA240VAC
overload protection 105% to 150% cut off output, automatic recovery
Overvoltage protection CH1:5.75~6.75V
temperature coefficient ±0.03%℃(0~50℃)
Start, rise, hold time 200ms、50ms、30ms/230VAC
Seismic resistance 10-500Hz; 2G 10min/cycle, duration of 60 minutes, for each axis
Pressure resistance Input output interval: 3kV Input to shell interval: 1.5kV Output to shell interval: 0.5kVAC for one minute
Isolation resistor Between input and output, between input and housing, between output and housing: 500VDC/100M Ω
Working temperature and humidity -10℃～+60℃ 20%~90%RH
Storage temperature and humidity -20℃～+60℃
External dimensions 129*98*38mm
weight 0.4kg
safety standards Meets UL1950 requirements (does not apply for labeling)
EMC standards DESIGN REFER TO FCC PART15 CLASS A
Dimensional diagram of T-series switch power supply
T-50

PHLTD single group output power supply T-50V size 159x98x38mm weight 0.54kg
          model
performance		 T-50A T-50B T-50C T-50D
CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC output 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V
output voltage tolerance ±2％ ±5％ ±5％ ±2％ ±5％ ±5％％ ±2％ ±5％ ±5％ ±2％ ±6％ ±6％
output current 7A 1A 1A 5A 1A 1A 4A 1A 1A 4A 1A 1A
Current range 2-7A 0.2-1A 0.2-1A 1-5A 0.2-1A 0.2-1A 1-4A 0.2-1A 0.2-1A 1-4A 0.2-1A 0.2-1A
Ripple and noise ① 100MV 100mV 50MV 150MV 75mV 150mV 100MV 100mV 100mV 100MV 75mV 75mV
Stability of incoming lines ±0.5％ ±1％ ±1％ ±1％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％
Load stability ±0.5％ ±5％ ±5％ ±4％ ±0.5％ ±4％ ±1％ ±0.5％ ±0.5％ ±1％ ±0.5％ ±0.5％
DC OUTPUT POWER 50W 49W 50W 51W
Efficiency (typical) ② 66% 69% 71% 72%
Adjustable range of DC voltage CH:+10-5% CH:+10-5% CH:+10-5% CH1:+10-5%
Input Voltage 85-132VAC/170-264VAC switched by switch 240-370VDC 47-63Hz
Input Current 1.6A/115V 0.8A/230V
Impulse current Cold start current 20A/115VAC; 40A/230VAC
Leakage current ＜0.5mA240VAC
overload protection 105% to 135% cut off output, automatic recovery
Overvoltage protection CH1:5.75~6.75V
temperature coefficient ±0.03%℃(0~50℃)
Start, rise, hold time 200ms, 50ms, 16ms
Seismic resistance 10~500Hz; 2G 10min/cycle, duration of 60 minutes, for each axis
Pressure resistance Input output interval: 1.5kV Input to shell interval: 1.5kV Output to shell interval: 0.5kVAC for one minute
Isolation resistor Between input and output, between input and housing, between output and housing: 500VDC/100M Ω
Working temperature and humidity -10℃～+60℃ 20%~90%RH
Storage temperature and humidity -20℃～+85℃  10%~95%RH
External dimensions 159*98*38mm
weight 0.54kg
safety standards Meets UL1950 requirements (does not apply for labeling)
EMC standards DESIGN REFER TO FCC PART15 CLASS A
Dimensional diagram of T-series switch power supply
T-60

PHLTD single group output power supply T-60V size 159x98x38mm weight 0.54kg
          model
performance		 T-60A T-60B T-60C T-60D
CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC output 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V
output voltage tolerance ±2％ ±5％ ±5％ ±2％ ±5％ ±5％％ ±2％ ±5％ ±5％ ±2％ ±6％ ±6％
output current 7A 2A 1A 6A 2A 1A 5A 2A 0.5A 5A 1A 1A
Current range 1-7A 0.2-2A 0.2-1A 1-6A 0.2-2A 0.2-1A 1-5A 0.2-2A 0-0.5A 0.6-5A 0.2-1A 0.2-1A
Ripple and noise ① 100MV 100mV 50MV 150MV 75mV 150mV 100MV 100mV 100mV 100MV 75mV 75mV
Stability of incoming lines ±0.5％ ±1％ ±1％ ±1％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％ ±0.5％
Load stability ±0.5％ ±5％ ±5％ ±4％ ±0.5％ ±4％ ±1％ ±0.5％ ±0.5％ ±1％ ±0.5％ ±0.5％
DC OUTPUT POWER 64W 65W 67.5W 61W
Efficiency (typical) ② 66% 69% 71% 72%
Adjustable range of DC voltage CH:+10-5% CH:+10-5% CH:+10-5% CH1:+10-5%
Input Voltage 85-132VAC/170-264VAC switched by switch 240-370VDC 47-63Hz
Input Current 1.6A/115V 0.8A/230V
Impulse current Cold start current 20A/115VAC; 40A/230VAC
Leakage current ＜0.5mA240VAC
overload protection 105% to 135% cut off output, automatic recovery
Overvoltage protection CH1:5.75~6.75V
temperature coefficient ±0.03%℃(0~50℃)
Start, rise, hold time 200ms, 50ms, 16ms
Seismic resistance 10~500Hz; 2G 10min/cycle, duration of 60 minutes, for each axis
Pressure resistance Input output interval: 1.5kV Input to shell interval: 1.5kV Output to shell interval: 0.5kVAC for one minute
Isolation resistor Between input and output, between input and housing, between output and housing: 500VDC/100M Ω
Working temperature and humidity -10℃～+60℃  20%~90%RH
Storage temperature and humidity -20℃～+85℃ 10%~95%RH
External dimensions 159*98*38mm
weight 0.54kg
safety standards Meets UL1950 requirements (does not apply for labeling)
EMC standards DESIGN REFER TO FCC PART15 CLASS A
Dimensional diagram of T-series switch power supply
T-120

PHLTD single group output power supply T-120V size 199x110x50mm weight 0.9kg
          model
performance		 T-120A T-120B T-120C T-120D
CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC output 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V
output voltage tolerance ±2％ ±5％ ±5％ ±2％ ±5％ ±5％％ ±2％ ±5％ ±5％ ±2％ ±6％ ±6％
output current 11A 5A 1A 11A 4.5A 1A 5A 2.5A 1A 6A 2A 2A
Current range 2-11A 0.5-5A 0.2-1A 2-11A 0.5-4.5A 0.2-1A 2-10A 0.2-1A 0.2-1A 0.6-4A 0.2-1.2A 0.2-1.2A
Ripple and noise ① 100MV 150mV 150mV 80MV 150mV 150mV 80MV 150mV 150mV 80MV 120mV 180mV
Stability of incoming lines ±0.5％ ±1％ ±1％ ±0.5％ ±1％ ±1％ ±0.5％ ±1％ ±1％ ±0.5％ ±1％ ±1％
Load stability ±1％ ±5％ ±5％ ±1％ ±5％ ±5％ ±1％ ±5％ ±5％ ±1％ ±5％ ±5％
DC OUTPUT POWER 120W 120W 120W 120W
Efficiency (typical) ② 77% 77% 76% 80%
Adjustable range of DC voltage CH:+10-5% CH:+10-5% CH:+10-5% CH1:+10-5%
Input Voltage 90-132VAC/170-264VAC switched by switch 240-370VDC 47-63Hz
Input Current 2.5A/115V   1.25A/230V
Impulse current Cold start current 30A/115VAC; 60A/230VAC
Leakage current ＜0.5mA240VAC
overload protection 105% to 135% cut off output, automatic recovery
Overvoltage protection CH1:5.75~6.75V
temperature coefficient ±0.03%℃(0~50℃)
Start, rise, hold time 200ms, 50ms, 16ms
Seismic resistance 10~500Hz; 2G 10min/cycle, duration of 60 minutes, for each axis
Pressure resistance Input output interval: 1.5kV Input to shell interval: 1.5kV Output to shell interval: 0.5kVAC for one minute
Isolation resistor Between input and output, between input and housing, between output and housing: 500VDC/100M Ω
Working temperature and humidity -10℃～+60℃  20%~90%RH
Storage temperature and humidity -20℃～+85℃ 10%~95%RH
External dimensions 199*110*50mm
weight 0.9kg
safety standards Meets UL1950 requirements (does not apply for labeling)
EMC standards DESIGN REFER TO FCC PART15 CLASS A

Reviews

There are no reviews yet.

Be the first to review “PHLTD DC Three Group Switching Power Supply T Series”

Your email address will not be published. Required fields are marked *

Related products

Shopping Cart